[PVFS2-users] pvfs2 obnormal

[swin]

Rob Ross£¡

	This time I run pvfs2-genconfig  /etc/pvfs2-fs.conf /etc/pvfs2-server.conf  
again, every thing is default.
	but when I run  pvfs2-ping -m /mnt/pvfs2/, there's some problem:

(6) Verifying that fsid 104947808 is acceptable to all servers...
PVFS_mgmt_setparam_all: Unknown error 128
Failure: not all servers accepted fsid 104947808
TODO: need a way to tell which servers couldn't find the fs_id...

this is my /etc/pvfs2-fs.conf 
<Defaults>
    UnexpectedRequests 50
    LogFile /tmp/pvfs2-server.log
    EventLogging none
    BMIModules bmi_tcp
    FlowModules flowproto_multiqueue
    PerfUpdateInterval 1000
</Defaults>

<Aliases>
    Alias localhost tcp://localhost:3334
</Aliases>

<Filesystem>
    Name pvfs2-fs
    ID 104947808
    RootHandle 1048576
    <MetaHandleRanges>
        Range localhost 4-2147483650
    </MetaHandleRanges>
    <DataHandleRanges>
        Range localhost 2147483651-4294967297
    </DataHandleRanges>
    <StorageHints>
        HandleRecycleTimeoutSecs 360
        TroveSyncMeta yes
        TroveSyncData yes
        AttrCacheKeywords datafile_handles,metafile_dist
        AttrCacheKeywords dir_ent, symlink_target
        AttrCacheSize 4093
        AttrCacheMaxNumElems 32768
    </StorageHints>
</Filesystem>


and /etc/fstab:
# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
/dev/hda2   /       ext3    errors=remount-ro   0   1
/dev/hda1   none        swap    sw          0   0
proc        /proc       proc    defaults        0   0
/dev/fd0    /floppy     auto    user,noauto     0   0
/dev/cdrom  /cdrom      iso9660 ro,user,noauto      0   0
tcp://localhost:3334/pvfs2-fs /mnt/pvfs2 pvfs2 default,noauto 0 0

and /etc/pvfs2tab
tcp://localhost:3334/pvfs2-fs /mnt/pvfs2 pvfs2 default,noauto 0 0

by the way
gcc (GCC) 3.3.5 (Debian 1:3.3.5-8) and
libc6  2.3.2.ds1-20    

======= 2005-04-28 23:40:51 =======

>Hi,
>
>Can you send the pvfs2-ping output to us, as well as fstab, pvfstab, and
>server config files?
>
>Thanks,
>
>Rob
>
>swin wrote:
>> hello,all£¡
>> 
>> 	I compile pvfs2-1.0.1 with no problem, I use kernel 2.6.11.5, 
>> insmod and no problem, configure and run server with no problem,
>> when run pvfs2-ping, it give normal message, but when use any pvfs
>> command like pvfs-ls on the mounted pvfs filesystem, it start but
>> for very long time, there's no response and no return, and the 
>> server's cpu use rate up to very high. 
>>     When I use the kernel module and the ls command, the same as
>> above.
>> 	Any one can help me? 
>> 
>> 
>>  				
>> 
>> ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡swin
>> ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡swin at minigui.org
>> ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡2005-04-28
>
>.

= = = = = = = = = = = = = = = = = = = =
			

¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡ÖÂ
Àñ£¡
 
				 
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡swin
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡swin at minigui.org
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡2005-04-29