[Pvfs2-users] installation pvfs2-ping ok, but pvfs2-ls and pvfs2-cp fails

[Murali Vilayannur]

Hi Luiz,
Are you using it over TCP or any of the other supported BMI networks?
Something is definitely wrong with some of the most recent releases
(or even HEAD)
since this is the 2nd (or 3rd?) report of infinite looping on the client-side..
Can you turn on verbose event logging on the servers...you can do this
by running..
% pvfs2-setdebugmask -m "pvfs mount point from pvfs2tab file" verbose

I haven't had the chance to reproduce this yet..
If noone else beats me to it, I guess I can take a stab at this tonight.
Sam, Pete, RobL, RobR: any clues on what is happening?
thanks,
Murali

On 1/12/07, Luiz Mendes <luizmendesw at gmail.com> wrote:
> Hi,
>
> I got PVFS-2.6.1 and i did begin installation procedures according to pvfs2
> official website.
>
> It works until testing. pvfs2-ping command worked correctly, but pvfs2-ls
> didnt return anything and it was in loop state, running indefinitly.
>
> I stop pvfs2-ls process and i did try pvfs-cp example, and it didnt work
> too, return the following message:
>
> PVFS_sys_create: File exists
> Could not open /mnt/pvfs3/testfile2
>
> * pvfs3 is the other name that i choose, it didnt work previously in
> /mnt/pvfs2 too.
>
> i am using SUSE 10.1.
>
> Could you help me?
>
> _______________________________________________
> Pvfs2-users mailing list
> Pvfs2-users at beowulf-underground.org
> http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users
>
>
>